The LUNAmoon Carbide Corn Nail Drill Bit 5.0 mm – Yellow Very Fine Grit is a professional e-file attachment designed for gentle, smooth, and controlled removal of gel polish, rubber base, cover base, and other soft artificial nail coatings.
Featuring a rounded corn-shaped working head with a very fine cross-cut pattern, this carbide nail drill bit provides efficient removal of soft nail products while minimizing excessive friction and heat buildup. Its rounded safety tip allows nail technicians to work with greater control around the nail surface and sidewalls.
The yellow very fine grit is the gentlest cutting grade in this carbide bit range, making it an excellent choice for technicians who prefer gradual, controlled removal rather than aggressive filing. The precision-sharpened cross-cut teeth help remove product evenly, leaving a smoother surface for further nail preparation.
Manufactured from high-quality tungsten carbide, the LUNAmoon Corn Bit offers excellent wear resistance, durability, and consistent cutting performance. Each bit undergoes a collet-centering inspection to help ensure smooth rotation, minimal vibration, and reliable professional operation.
Designed for everyday salon use, this carbide nail drill bit combines gentle coating removal, precision, and long-lasting performance.
KEY FEATURES &BENEFITS
- Yellow Very Fine Grit: Extra-gentle cutting action designed for removing softer artificial nail coatings.
- Corn-Shaped Working Head: Tapered shape allows smooth and controlled product removal across the nail surface.
- Rounded Safety Tip: Helps reduce the risk of accidental scratches during proper e-file operation.
- 5.0 mm Diameter: Provides efficient surface coverage for controlled gel polish and base coat removal.
- Fine Cross-Cut Teeth: Designed for smooth, even product removal without aggressive cutting.
- Premium Tungsten Carbide: Durable, wear-resistant material suitable for repeated professional use.
- Reduced Heat Buildup: Precision cutting helps minimize friction and discomfort when used with the correct technique.
- Low-Vibration Performance: Each bit undergoes collet-centering inspection to support smooth, balanced rotation.
- Reduced Clogging: Cross-cut design helps prevent excessive product buildup between the cutting teeth.
- Long-Lasting Sharpness: Manufacturer-reported wear resistance is approximately 2–3 times higher than standard cutters.
- Non-Magnetic Material: Does not magnetically attract filing dust.
- Sterilization Resistant: Designed to withstand compatible professional cleaning, disinfection, and sterilization procedures.
- Professional E-File Compatibility: Suitable for nail drill machines that accept standard 2.35 mm shanks.
PRODUCT SPECIFICATIONS
Brand: LUNAmoon
Country of origin: Ukraine
Product Type: Carbide Nail Drill Bit / Carbide Cutter
Shape: Corn / Tapered Cone with Rounded Tip
Material: Tungsten Carbide
Diameter: 5.0 mm
Working Head Length: 15.1 mm
Shank Length: 36.2 mm
Abrasiveness: Yellow – Very Fine / Extra Soft Gri
Cutting Pattern: Fine Cross-Cut Teeth
Recommended Rotation Speed: 25,000–35,000 RPM
Rotation Direction: Forward
Recommended Use: Gel polish removal, cover base removal, rubber base reduction, soft artificial coating removal, and surface smoothing
Sterilization: Dry-heat sterilization according to manufacturer instructions, not exceeding 180°C
RECOMMENDED APPLICATIONS
The LUNAmoon Carbide Corn Nail Drill Bit 5.0 mm Yellow Very Fine Grit is designed for nail technicians who need gentle and consistent removal of softer artificial nail products.
- Gel Polish Removal: Gradually removing cured gel polish from artificial coating layers.
- Rubber Base Reduction: Reducing the thickness of flexible rubber base coatings during nail maintenance.
- Cover Base Removal: Removing camouflage and cover base products without unnecessarily aggressive filing.
- Soft Artificial Coating Removal: Working with softer gel-based materials that do not require coarse carbide cutters.
- One Step Gel Polish removal: Perfect for removing One Step pedicure gel polishes.
- Surface Smoothing: Refining remaining artificial coating layers before further nail preparation.
- Product Thickness Reduction: Gradually reducing excess product while maintaining control over the filing process.
- Manicure Maintenance: Removing old coating during professional gel manicure appointments.
- Controlled E-File Removal: Suitable for technicians who prefer gradual product reduction with a very fine carbide cutting surface.
The rounded corn shape provides efficient contact with the coating, while the fine cross-cut pattern supports smooth, even filing.
PROFESSIONAL WORKING RECOMMENDATIONS
For optimal results, use the LUNAmoon Carbide Corn Bit with a professional electric nail drill and follow the manufacturer’s recommended operating settings.
- Recommended Speed: 25,000–35,000 RPM, adjusted according to equipment specifications, product hardness, and technician experience.
- Rotation Direction: Forward.
- Use smooth, continuous movements without excessive pressure.
- Keep the working head moving to avoid localized heat buildup.
- Work primarily with the side of the bit when reducing coating thickness.
- Use the rounded tip carefully when approaching narrower areas.
- Maintain a controlled working angle to achieve even product removal.
- Avoid holding the bit in one place for extended periods.
- Stop filing if the client experiences heat, discomfort, or unusual vibration.
- Leave a thin protective layer of product when appropriate rather than filing directly onto the natural nail plate.
- Avoid direct contact with the natural nail plate, cuticles, or living skin.
Professional Tip: The yellow very fine carbide bit is particularly useful when removing soft gel polish and flexible base coatings that do not require aggressive cutting. Its gentle cross-cut teeth allow technicians to reduce product gradually while maintaining greater control over the remaining coating thickness.
For dense hard gel, acrylic, or other rigid enhancement materials, a medium or coarse carbide bit may provide more efficient removal.
Important: This carbide bit is intended for removing artificial nail coatings, not for filing the exposed natural nail plate. Even very fine carbide cutting teeth can damage natural nails if used incorrectly.
CLEANING, DISINFECTION & STERILIZATION
Proper maintenance helps preserve the cutting edges, maintain professional hygiene, and extend the service life of the carbide nail drill bit.
- MECHANICAL CLEANING
After each use, remove visible gel dust, coating residue, and other debris using a specialized instrument-cleaning brush.
Pay particular attention to the fine cross-cut grooves where product particles may accumulate. - ULTRASONIC CLEANING
Use an ultrasonic cleaner with an appropriate solution compatible with tungsten carbide instruments, following the equipment manufacturer’s instructions.
Ultrasonic cleaning helps remove product residue trapped between the cutting teeth. - DISINFECTION
Use a professional disinfectant suitable for reusable carbide nail drill bits.
Follow the manufacturer’s recommended concentration, contact time, rinsing instructions, and material compatibility requirements.
Excessive disinfectant concentration may damage the cutting surface and reduce the bit’s service life. - DRYING
Thoroughly dry the bit after cleaning and disinfection.
Make sure no moisture remains in the cutting grooves before dry-heat sterilization. - STERILIZATION
The LUNAmoon Carbide Corn Bit is designed to withstand compatible dry-heat sterilization.
Sterilize only when completely dry and follow the manufacturer’s validated sterilization cycle.
Maximum manufacturer-stated dry-heat temperature: 180°C. - STORAGE
Store cleaned and sterilized bits in a dry, protected environment to prevent contamination, moisture exposure, and mechanical damage.
For professional use only.
WHY CHOOSE LUNAMOON CARBIDE CORN NAIL DRILL BIT?
The LUNAmoon Carbide Corn Nail Drill Bit 5.0 mm Yellow Very Fine Grit is an excellent addition to any professional nail technician’s e-file collection, especially for those specializing in gel polish manicures, rubber base services, and gentle artificial coating removal.
Its durable tungsten carbide construction, fine cross-cut teeth, rounded safety tip, and low-vibration design make it a reliable tool for gel polish removal, cover base reduction, rubber base filing, soft artificial coating removal, and professional nail maintenance.
Whether you’re upgrading your nail drill accessories or searching for a 5.0 mm yellow very fine carbide corn bit for gentle gel polish removal, LUNAmoon offers the precision, smooth performance, and durability needed for professional salon work.
PLEASE NOTE: The product image on the website may differ slightly from the actual product due to the lighting and screen calibration.












Reviews
There are no reviews yet.